Managing Endpoints > Using the ENDPOINTS Page > Using the ENDPOINT DETAILS Page

Using the ENDPOINT DETAILS Page

The ENDPOINT DETAILS page displays complete configuration and status information for the selected endpoint and contains menu options that let you perform the following actions:

Figure 5-7: ENDPOINT Details Page

Displaying Endpoint Details

  1. From the MC's top menu, click ENDPOINTS.
  2. In either the GROUPED or UNGROUPED table, select the desired endpoint.
  3. Click ENDPOINT and then DETAILS.

Opening an Endpoint's Profile

  1. From the ENDPOINT DETAILS page, click PROFILE.
  2. Click DETAILS to open the endpoint's profile in edit mode.

Applying a Profile to an Endpoint

You can update an endpoint by applying a profile from the ENDPOINTS page or the ENDPOINT DETAILS page, as shown below. This applies the profile right away or after any currently running scheduled actions have completed.

  1. From the ENDPOINT DETAILS page, click PROFILE.
  2. Click APPLY
  3. Click OK at the message prompt.

Moving an Endpoint

You can move an endpoint to a group either from the ENDPOINTS page or the ENDPOINT DETAILS page, as shown below.

  1. From the ENDPOINT DETAILS page, click STRUCTURE and then MOVE.
  2. Select the desired group or sub-group, and then click MOVE TO GROUP.

Renaming an Endpoint

You can rename an endpoint either from the ENDPOINTS page or the ENDPOINT DETAILS page, as shown below.

  1. From the ENDPOINT DETAILS page, click STRUCTURE and then RENAME.
  2. Enter a unique name for the endpoint (from within its group hierarchy) and click RENAME ENDPOINT.

Note: If you have configured a global naming convention for endpoints that applies when they move to or from a group, this overrides any manually configured endpoint name. If you then move the endpoint into or out of a group, the automatic naming rule will apply.

Powering Down an Endpoint

The POWER DOWN option causes an endpoint to power down right away, or after any currently running scheduled actions have completed. You can power down an endpoint either from the ENDPOINTS page or the ENDPOINT DETAILS page, as shown below.

  1. From the ENDPOINT DETAILS page, click ENDPOINTS and then POWER DOWN.
  2. Click OK at the message prompt.

Resetting an Endpoint

The POWER RESET option causes an endpoint to reset (reboot) right away, or after any currently running scheduled actions have completed. You can reset an endpoint either from the ENDPOINTS page or the ENDPOINT DETAILS page, as shown below.

  1. From the ENDPOINT DETAILS page, click ENDPOINTS and then POWER RESET.
  2. Click OK at the message prompt.

Resetting Endpoint Properties to Their Defaults

The RESET TO DEFAULT option causes an endpoint to reset to its default configuration right away, or after any currently running scheduled actions have completed. You can reset an endpoint to its default configuration either from the ENDPOINTS page or the ENDPOINT DETAILS page, as shown below.

  1. From the ENDPOINT DETAILS page, click ENDPOINTS and then RESET TO DEFAULT.
  2. Click OK at the message prompt.
  3. If the endpoint does not reset to its default configuration, reboot the endpoint either manually or from the MC using the POWER RESET command.

Accessing an Endpoint's AWI

From the ENDPOINT DETAILS page click WEB INTERFACE to open the endpoint's AWI in a browser to configure the endpoint directly.

For information about the AWI, please see "PCoIP® Zero Client Configuration Help" (TER1504003) in the Teradici Support Documentation Center.

Viewing an Endpoint's Event Log

  1. From the ENDPOINT DETAILS page click VIEW LOG to view the endpoint's event log.


  2. Scroll to the bottom of the list to see the most recent actions.
  3. Click OK to close the event log.

 

© 2016 Teradici Corporation. All rights reserved. TER1401005 Issue 7, Version 2.1, 26 Jan 2016
Click here for intellectual property rights information.