Skip to content

2. License the Agent

The Standard Agent for Linux must be assigned a valid PCoIP session license before it will work. Until you've registered it, you can't connect to the desktop using a PCoIP client.

You receive a registration code when you purchase a pool of licenses from Teradici. Each registration code can be used multiple times; each use consumes one license in its pool.

Note: Registration code format

Registration codes look like this: ABCDEFGH12@AB12-C345-D67E-89FG

PCoIP agent license registrations are managed automatically by Teradici's Cloud Licensing service. If necessary, you can manage them yourself, using your own locally-installed PCoIP license server instead.

If you need to purchase licenses, contact Teradici.

Troubleshooting Licensing Issues

If you're encountering problems with Teradici licensing, refer to Troubleshooting License Issues.

Using Teradici Cloud Licensing

To use Cloud Licensing, all you need to do is provide a registration code for each PCoIP agent in your deployment (the same registration code can be used multiple times).

To provide the registration code:

SSH into the agent machine, and invoke pcoip-register-host with the license registration code and proxy settings if required:

pcoip-register-host --registration-code=<registration-code> [--proxy-server=<proxy-server-address>] [--proxy-port=<proxy-port-number>]

Whitelist network blocks for Teradici Cloud Licensing

If you are using Teradici Cloud Licensing, you will need to whitelist the following:

  • teradici.flexnetoperations.com
  • teradici.compliance.flexnetoperations.com

Alternatively, you can also ensure the following network blocks are whitelisted:

  • Production: 64.14.29.0/24
  • Disaster Recovery: 64.27.162.0/24

The following network blocks are not currently in use, but may also be used in the future:

  • Production: 162.244.220.0/24
  • Disaster Recovery: 162.244.222.0/24

Licensing PCoIP Agents With a Local License Server

In deployments where PCoIP agents cannot access the internet, or where cloud-based licensing is not permitted or desired, a local PCoIP License Server can be used instead. The PCoIP License Server manages PCoIP session licenses within your private environment.

Configuring PCoIP agents to use a local license server is done in one of two ways, depending on whether your deployment uses a PCoIP Connection Manager, or whether your PCoIP clients connect directly to PCoIP agents.

Brokered Environment Licensing

In brokered deployments, the license server address is configured in the Connection Manager, which passes it through to its managed PCoIP agents.

Brokered Licensing Flow Local license validation using a Standard Agent for Linux and a brokered connection

When using a Connection Manager, the license server address is only configured once no matter how many PCoIP agents are behind the Connection Manager.

To set the License Server URL in the Connection Manager:

  1. On the Connection Manager machine, use a text editor to open /etc/ConnectionManager.conf.

  2. Set the LicenseServerAddress parameter with the address of your local license server:

    • http://{license-server-address}:{port}/request
  3. Save and close the configuration file.

  4. Restart the Connection Manager.

Verifying Your Brokered Licensing Configuration

To verify your system's licensing configuration, run pcoip-validate-license from the console on the Standard Agent for Linux machine. The command will ping the license server and attempt to retrieve information on an available license:

pcoip-validate-license ‑‑license-server-url <license-server-address> [‑‑proxy-server <proxy-server-address>] [‑‑proxy-port <proxy-port-number]

Where <license-server-address> is the address of the license server to ping, formatted as http://{license-server-address}:{port}/request

If the license server is behind a proxy server, provide the proxy information via the ‑-proxy-server and ‑-proxy-port parameters.

If successful, the response will show that a valid license was found on the license server, and its expiration date.

If the connection is unsuccessful, investigate the following possibilities:

  • The license server address is incorrect, or formatted incorrectly.

  • The license server is inaccessible.

  • There are no available licenses on the license server. pcoip-validate-license will only return a positive response if there is at least one available session license.

  • If you have only one license on the license server and run pcoip-validate-license from a PCoIP session, the command will fail because you are currently using the single license. In this scenario, disconnect your PCoIP session and try again from an SSH session instead.

Unbrokered Environment Licensing

In direct, or unbrokered, deployments, each PCoIP agent is configured with the license server address via a local agent setting. When a client initiates a new PCoIP session, the PCoIP agent uses its local configuration to communicate with the license server.

Direct Licensing Flow Local license validation using a Standard Agent for Linux and a direct (unbrokered) connection

Each PCoIP agent in your environment must be individually configured with the license server's URL.

To configure the License Server URL on the Standard Agent for Linux machine:

  1. Using a text editor, open /etc/pcoip-agent/pcoip-agent.conf.

  2. Add or modify the pcoip.license_server_path directive:

    pcoip.license_server_path = <license-server-address>
    

    Where <license-server-address> is the address of the license server, formatted as http://{license-server-address}:{port}/request.

  3. If the license server is behind a proxy server, provide the proxy information using the pcoip.license_proxy_server and pcoip.license_proxy_port directives.

  4. Save and close pcoip-agent.conf.

The changes will take effect on the next PCoIP session.

Verifying Your Unbrokered Licensing Configuration

To verify your system's licensing configuration, run pcoip-validate-license from the console on the Standard Agent for Linux machine. The command will ping the license server and attempt to retrieve information on an available license:

pcoip-validate-license ‑‑license-server-url <license-server-address> [‑‑proxy-server <proxy-server-address>] [‑‑proxy-port <proxy-port-number]

Where <license-server-address> is the address of the license server to ping, formatted as http://{license-server-address}:{port}/request

If the license server is behind a proxy server, provide the proxy information via the ‑-proxy-server and ‑-proxy-port parameters.

If successful, the response will show that a valid license was found on the license server, and its expiration date.

If the connection is unsuccessful, investigate the following possibilities:

  • The license server address is incorrect, or formatted incorrectly.

  • The license server is inaccessible.

  • There are no available licenses on the license server. pcoip-validate-license will only return a positive response if there is at least one available session license.

  • If you have only one license on the license server and run pcoip-validate-license from a PCoIP session, the command will fail because you are currently using the single license. In this scenario, disconnect your PCoIP session and try again from an SSH session instead.