Skip to content

Wacom Tablet Support

The Graphics Agent for Linux supports certain Wacom tablets when connected via USB, and when using a PCoIP Zero Client or a PCoIP Software Client.

The following Wacom tablet models have been tested with these clients:

  • PTK-440
  • PTH-660
  • PTH-860
  • Cintiq 22HD

Other Wacom tablets may work, but have not been tested.

Wacom tablets are supported only in low-latency environments. Tablets in network environments with greater than 25ms latency will show reduced responsiveness and are not recommended.

Important: Technology preview with improved Wacom tablet support

Teradici has released a technology preview that supports local termination on the following Wacom tablets:

  • PTK-440
  • PTH-660
  • PTH-860
  • Cintiq 22HD

Locally terminated tablets have greatly improved responsiveness, and tolerate higher-latency (25ms and higher) networks.

Participation in the technology preview requires upgraded firmware on your PCoIP Tera2 Zero Clients and PCoIP PCoIP Graphics Agent 2.13 or higher on your host machine. For access to the technology preview firmware, select the appropriate technology preview on Teradici's website.

Changing Wacom Configuration

Wacom devices are supported via USB automatically. Using the USB device rules setting, you can further restrict this to specific Wacom devices if necessary.

Note: PCoIP Client Configuration is required

The PCoIP Software Client for Mac must enable Wacom tablets via the USB Devices setting. See the Teradici PCoIP Software Client for macOS Administrators' Guide.