Configuring IPv6 Settings

The settings on this page let you enable IPv6 for PCoIP devices connected to an IPv6 network.

You can access this page from the Configuration > IPv6 menu.

IPv6
AWI IPv6 Page

Reboot

When you make a change to one of the settings on this page, you must reboot your device for the change to take effect.

IPv6 Page Parameters

Parameter Description
Enable IPv6 Enable this field to enable IPv6 for your PCoIP devices.
Link Local Address This field is automatically populated.
Gateway Enter the IPv6 gateway address.
Enable DHCPv6 Enable this field to set up Dynamic Host Configuration Protocol version 6 (DHCPv6) for your device.
DHCPv6 Addresses When DHCPv6 is enabled and the device is rebooted, the server automatically populates these fields with addresses for the device.
Primary DNS The device's primary DNS IP address. If DHCPv6 is enabled, this field is automatically populated by the DHCPv6 server.
Secondary DNS The device's secondary DNS IP address. If DHCPv6 is enabled, this field is automatically populated by the DHCPv6 server.
Domain Name The domain name used (e.g., "domain.local") for the host or client. If DHCPv6 is enabled, this field is automatically populated by the DHCPv6 server.
FQDN The fully qualified domain name for the host or client. If DHCPv6 is enabled, this field is automatically populated by the DHCPv6 server.
Enable SLAAC Enable this field to set up Stateless Address Auto-configuration (SLAAC) for your devices.
SLAAC Addresses When SLAAC is enabled and the device is rebooted, these fields are automatically populated.
Enable Manual Address Enable this field to set up a manual (static) address for the device.
Manual Address Enter the IP address for the device.