Configuring SNMP¶
SNMP stands for Simple Network Management Protocol and allows an administrator to monitor hardware and software endpoints through an SNMP agent. The agent can be enabled on the device you are monitoring, and a monitoring station can then view the data. Teradici has provided a MIBv2 and User Guide for download to help collect PCoIP related data on the PCoIP Remote Workstation Card. Access to the SNMP agent is provided by the Community Name.
Community Name
When enabling the SNMP agent, consider changing the Community Name from the default to another name of your choice.
SNMP Agent
For more information on using the PCoIP SNMP Agent, see Using SNMP with a PCoIP® Device User Guide.
SNMP Management Locations¶
| Setting | Default | AWI | OSD | Management Console |
|---|---|---|---|---|
| Enable SNMP | Disabled | |||
| Community Name | public |
From the AWI SNMP page, you can enable or disable the device’s SNMP agent.
AWI SNMP page
To configure SNMP settings:
-
From the AWI, select Configuration > SNMP.
-
From the AWI SNMP page, do the following:
-
Select or clear the Enable SNMP check box.
When enabled, the device enables the PCoIP SNMP agent to respond to SNMP requests. Disabling the SNMP agent prevents it from responding to SNMP requests and from generating traps. It also ensures that the PCoIP SNMP MIB cannot be accessed.
-
For Community Name, enter the SNMP community name used by the device.
-
-
Click Apply.