MC 19.05.0

Release Overview

PCoIP Management Console version 19.05 is a feature release with functional changes and bug fixes over release 3.2. .

These release notes provide a summary of compatibility notes, resolved issues, and known issues for this release.

To evaluate PCoIP Management Console - ENTERPRISE features, request a 60-day enterprise trial license.

Note: After the 60-day trial expires, any installed licenses must be removed in order to install PCoIP Management Console - Enterprise or Free.

What's New in Release 19.05

Redhat Package Manager (RPM) - Tech preview

With RPM, Management Console's data, certificates, and OS configurations will be preserved during upgrades. With Management Console RPM, all Linux dependencies are installed so you can get up and operational quickly when you upgrade (to a future release).

Schedule Time Zone field added to schedules 

Schedules can now be set to run in the endpoint location's time zone.

Endpoints auto-configuration using generic tag and password

MC is now able to auto-configure endpoints based on generic tag or password, in addition to auto-configure by IP address. 

New property to switch Zero Client OSD color scheme

MC profiles have been updated with new properties to set Zero Client OSD color scheme to support low-light environments. Requires Zero Client firmware version 6.3.

Security enhancements

This release contains improvements and enhancements around the security and stability of the Management Console.

Resolved Issues

The group dialog displays all groups.

82201

When editing a schedule all available groups are displayed in the group dialog.

Endpoints requiring reboot status has been removed from dashboard

82148

Dashboard no longer contains endpoints requiring reboot information as this status does not get updated even after endpoints have been restarted.

View button on autoconfig page removed.

82025

View button on autoconfig page has been removed as it provides no additional information.

Removing and Adding AD configuration no longer cause multiple accounts for the same user to be created

81008

Removing and recreating same AD configuration will only create one account for the same user.

Management Console can filter endpoints on "Failed Offline"

79363

It is now possible to filter endpoints based on "Failed Offline" for profile application.

SNMP community field validates input

78073

The SNMP community field in the profile validates characters inputted to ensure they are only printable characters.

Bridged USB devices no longer show as non-compliant when in a different order

74884

Bridged USB devices were showing as non-compliant if the same VID and PID combinations were in the profile and the endpoint but in a different order. This is no longer the case.

Different order in broker address cache list no longer shows as Non-Compliant

74857

Profile compliance was showing an endpoint as non-compliant if it has the correct broker address cache list, but in a different order than in the profile. This is no longer the case.

Profile compliance is calculated properly for monitor emulation and topology resolutions

74413

Profile compliance is calculated properly for monitor emulation and topology resolutions

Proper message is logged to daemon-startup log when RAM size is too small

71232

When RAM size is too small to run Management Console, a proper log message will be logged to the daemon-startup log file. See the administrator's guide for minimum requirements.

Profile Compliance calculation does not fail on endpoint password check.

70631

The endpoint administrator password is not considered during profile compliance recalculation.

"Console" text was removed from the URL

61464

"Console" text was removed from MC URLs

Known Issues

Power Down and Power Reset schedules are inaccessible

90015

If a profile is assigned to a group, then Power Down and Power Reset schedules using that group are inaccessible

Manual Discovery fails when nic name does not start with eth or ens

88706

When the nic card name does not start with eth or ens, Manual Discovery will fail.

Profile application fails with display rotation

84249

Profile application fails when monitor emulation rotation is set to 90 degrees clockwise for the 2nd display.

Workaround:

None

Peer column is empty when added to the Endpoint table

77142

If the peer column is added to the Endpoint table, it will show no value.

Workaround:

Press the refresh button on the Endpoints page after the peer column is added to the Endpoint table.

Endpoint Details shows non-compliance before settings available

77043

A recently discovered online endpoint may show non-compliance for some endpoints and profile values in the Endpoints Details page, even though there is no endpoint data available yet.

Workaround:

Wait for the Management Console to complete getting settings information from the endpoint, or use the REFRESH button.

Auto Reconnect setting not forcing a reboot

76946

The Auto Reconnect setting, which is an Advanced setting for Direct to Host + SLP Host Discovery should require a reboot when set. The Management Console, however, is not forcing the endpoint to reboot when this setting is changed via the profile.

Primary IPv6 DNS value not being verified

76943

The Management Console is not verifying entered values in the Primary IPv6 DNS property. As a result, if an invalid value is entered, then the profile application will fail with the device returning the status: PEMSTATUSINVALIDNODEVALUE.

Workaround:

Manually ensure the Primary IPv6 DNS property value is correct.

No error message when attempting to delete a profile that is in use.

75030

The error message "Error: Cannot delete profiles that are in-use. Please unassign the profile from all groups and try again." should display when attempting to delete a profile that is used by a group. Instead now there is an exception showing in the jetty log and no error message in the interface.

The certificate size in the certificate store of a profile is not accurate.

74351

Certificates uploaded to store in profile does not show correct size after the profile is saved.

Filters for profile failure do not match the actual statuses.

73241

Profile failure descriptions have been modified and the filters have not. This will result in not  being able to do a search on profile failure since it now reports as profile failure offline.

Certificate status filters show Remote Workstation Cards

73178

Certificate status filters show Remote Workstation Cards in the results even though certificates cannot be provisioned to those endpoints by SCEP.

CA Identifier field cannot be cleared

72694

When creating an ENDPOINT CERTIFICATE rule, the CA Identifier field cannot be replaced with an empty value.

Workaround:

To clear the value on endpoints, first delete the original rule and then create a new one with no CA Identifier value.

Not all endpoints move between groups

72022

Some endpoints may not move between groups if a large number of endpoints (for example > 1500) are selected to be moved.

MOVE TO GROUP dialog not showing any groups

71558

The MOVE TO GROUP dialog box may not show any groups if some groups in the hierarchy share very similar names, only differing by the absence or presence of spaces.

Workaround:

Rename one of the groups so that it contains a different non-whitespace character.

Dashboard Endpoints Requiring Reboot reports incorrect number

71085

The dashboard Endpoints Requiring Reboot link displays an incorrect number of endpoints requiring reboot. This is observed after clicking on the link, the Endpoints table count does not match that displayed on the dashboard.

This can happen when updating Remote Workstation Cards, the dashboard count may not update after the Remote Workstation Card has been rebooted.

Database migration fails when the session timeout is exceeded

70838

If a database migration exceeds the configured session timeout of the PCoIP Management Console web interface, the database may shift to in an inconsistent state. When this happens the log file will contain java.lang.IllegalStateException and java.lang.NullPointerException errors.

Workaround:

Prior to performing the database migration, set the session timeout to Never.

Refresh button does not reset itself

70632

The Refresh button on the Endpoints Details page may remain in the Refreshing state after being pressed.

Some filters not correctly operating

70128

The following filters do not correctly filter the endpoint table contents in this release:

  • Profile Mismatch
  • Power Reset
  • Certificate Expiry date
  • Get All Settings
  • Network Location
  • MAC Address
  • IP Address
  • Firmware Upload

Text cannot be edited from middle of the group move dialog using IE11

70096

When using Internet Explorer 11, if the cursor is placed mid-text in the search text field of the group move dialog, after typing a character the cursor will jump to the end of the line.

Workaround:

When retyping the content, erase it all and type from an empty text field. Or alternatively switch to Chrome, Firefox or Edge.

Request Certificate stays "in progress" if endpoint rejects server address

69762

If the endpoint rejects the certificate server address, then the Request Certificate assignment will remain "in progress" and never get set to "failed".

Path required in SCEP server URI

69668

The SCEP server URI in the Endpoint Certificate page will reject any URI that does not include path. For example, http://xyz.com will fail but [http://xyz.com/path] will pass.

Monitor Emulations are not migrated from Management Console 1.x

68795

A migration from Management Console 1.x will successfully migrate the Monitor Emulation setting for Video Port 1, but the other Video ports will be set to 'Disable' after the migration.

Single character top level domain (TLD) invalid for View Connection Server

68660

Single character top level domain (TLD) are rejected in the Server URI field of Session Connection Type "View Connection Server". For example, https://server.domain.x will be rejected.

Web browser may cache content from before upgrade

68545

After an upgrade some web browsers may cache content from the previous release of the Management Console resulting in some new features or changes not rendering properly

Workaround:

Clear the web browser's cache.

Migrations from releases prior to 2.5 may fail

68452

Migrating PCoIP Management Console deployments to PCoIP Management Console 2.5.1 or 3.0.0 may fail with a corrupted database due to the database restore taking too long. This issue stems from a known issue (68605) in older releases (2.4 and earlier), which results in excessively large or corrupted database backups.

Workaround:

See KB 1029 for instructions on cleaning the database prior to backup.

Migrated profiles fail to apply settings if the firmware has changed from 5.x to 6.x during the migration

67932

If a profile in a previous release of Management Console was configured for firmware 5.x, is migrated to Management Console 3, and only firmware 6.0.0 or higher is installed, then when the profile is next applied, it will upgrade endpoints to the new firmware but fail to apply the profile settings with the status SKIPPED.

Workaround:

Upload firmware 5.x into Management Console 3. Edit the profile with this problem. Change the profile to the 5.x firmware and save it. Change the profile back to firmware 6.x and save it.

Power Reset statuses incorrect after group or profile change

67621

When an endpoint is moved between groups, or the profile for the group is changed, then all statuses in the Endpoint table should update and either be unknown, or recalculated based on the new group or profile. This does not occur for 'Firmware Power Reset' and 'Profile Power Reset' statuses. These two status values continue to have the previous value.

Certificate Status incorrect after changes outside of Management Console

67294

The certificate status of an endpoint can be incorrect if the certificate store or 802.1x settings are modified on the endpoint  (or endpoint is factory reset) from outside of the Management Console.

Some predefined filters not showing results

66993

The predefined filters Endpoint Updates Pending, and Endpoints Waiting on Restart do not consistently display endpoints matching those states.

APPLY profile active when it should be disabled

66972

The APPLY menu item under the PROFILE menu in the ENDPOINTS page is displayed as being active even when there is no profile associated with the selected group or endpoints.

Mouse hover is not revealing all active filters

66971

If more than two filters are active on the ENDPOINTS page, then hovering over the filter list will not reveal all of the active filters.

Remote Configuration Internal and External Address Port always required

66866

Remote Configuration (Settings > Remote) cannot be saved if the Internal Address and External Address do not have port number entered even though the help tip states that the port is only required for non-default port values.

Changing system certificate disables users

66454

Changing the certificate for the Management Console will disable all users except the one that updated the certificate.

Workaround:

Log back in after changing the certificate and re-enable the users.

Endpoint settings temporarily removed from database during upgrade from Management Console 2.x to 3.0

66374

When migrating from Management Console 2.x to 3.0, if there are profiles that contain zero client firmware 6.0.0, then the settings data of the endpoint will be dropped from the Management Console. The information will repopulate the next time the endpoint reports its current settings back to the Management Console.

Workaround:

Remove firmware 6.0.0 from profiles prior to upgrading or wait for endpoints to report all their settings back in.

Profile application fails when "Server URI" and "DNS Name or IP Address" are too long

66162

Profile settings permit values that are too long for the "Server URI" and "DNS Name or IP Address" settings result in failed profile applications.

Workaround:

Ensure values for "Server URI" and "DNS Name or IP Address" are no more than 67 characters long.

Incorrect empty value for "Pool Name to Select" is shown

66161

Blank values for the profile setting "Pool Name to Select" are incorrectly shown as "Not Set" on the Endpoint Details page.

Session -> Server URI setting not always being set on endpoint

66133

The Server URI setting for the View Connection Server session type is not always applied to the endpoint.

A new session type may not get applied to an endpoint if the profile setting is missing the server URL.

66127

A new session type may not get applied to an endpoint if the profile setting is missing the server URL.

Blank values are not accepted for View Connection Server advanced "Custom Session SNI" setting

66078

Blank values are not accepted for View Connection Server setting Custom Session SNI found in the advanced section.

OSD Logo is not saved if profile firmware version is switched on a new profile

66032

When creating a new profile, if the OSD logo is set, the profile saved and then the firmware version changed, the OSD logo will not be in the profile.

Workaround:

Save the profile. Exit the profile, and return to add the OSD Logo.

Some comparisons for IP Address and MAC Address filters do not work correctly

65917

The comparison values of "is greater than" and "is not" are not producing results for the IP Address and MAC Address filters and may result in a "ValidationException" entry in the console log file.

ENDPOINT -> DETAILS active when it should be disabled

64042

When selecting a group in the ENDPOINTS table, the ENDPOINTS -> DETAILS menu item is shown as active when it should be disabled.

Exporting the results of a search will show empty values in the Profile column.

63913

Exporting the results of a search will show empty values in the Profile column.

Error 500: Internal Server

63202

On some pages, if it is left idle for an excessive period, the Management Console may display an Error 500: Internal Server page.

Workaround:

In your web browser, go back to the base URL of the Management Console and re-login.

Some endpoints that have not connected in a long time show as online

63017

Some endpoints that have not connected in a long time show as online.

Profile Mismatch column on the Endpoint's page incorrectly shows True

61140

The Endpoints page table incorrectly shows Profile Mismatch is True for some zero clients even though the Endpoint Details page does not show any mismatches.

Web interface unavailable for a Management Console with DHCP assigned host name.

59280

Users are not able to log into the Management Console web interface when the DHCP server assigns a host name to the Management Console Virtual Appliance. The error shown on the login page is "Waiting for the server to start."

Workaround:

Follow the steps described in knowledge base article KB 1450.

Disabling individual schedule does not work without start time.

55912

Disabling individual schedule does not work if the user selects only the date without a start time.

Workaround:

Ensure your schedule has a start time in addition to a start date.

Incorrect count for additional schedules on dashboard

55636

The 'more schedules' text in the Dashboard section for Upcoming Schedules always states '(1) more schedules' regardless of how many schedules are upcoming but do not fit in the view.

Profile mismatch reported when Authorized Devices is set to 'Any'

54060

The endpoint details page will report a device as having a profile mismatch if the profile settings for the profile applied to the device has Peripherals > Authorized Devices set to Any Device Class, Any Sub Class, or Any Protocol.

New features from latest PCoIP Management Console disappear when using FQDN instead of IP address

51732

Some web browsers retain cache from previous releases of PCoIP Management Console cache, therefore features from the new version of PCoIP Management Console disappear when using FQDN instead of IP address.

Workaround:

Clear the web browser's cache.

Profile applications applied from the Endpoints page is not recorded in the Schedule > History page

48169

When applying a profile to a group from the Endpoints page, the application is not recorded in the Schedule > History page and the power reset assignment for the profile is in the 'Failed' state when it should be skipped.

Exporting endpoints on Firefox downloads a file with unexpected filename and without '.csv' file extension

43864

Exporting the endpoints on Firefox downloads a file with an unexpected filename and without '.csv' file extension. Following this, the 'Endpoints' page briefly displays a 'Server not responding' message and jumps to the dashboard.

Workaround:

At the time of saving, rename the file.

Session filters return no results

39456

Applying filters for Session Status 'In Session' or 'Out of Session' does not display devices in the endpoints table.

Deleting a group will silently delete auto-configuration rules

38229

When a group is deleted, all auto-configuration rules assigned to that group will also be removed without any notification.

Endpoint naming using Group Naming does not work with auto configuration

34756

To give zero clients with auto configuration a Primary Group Name and/or Deepest Sub-group Name, go to Settings > Naming and select moved between grouped and ungrouped rule in the Rename Endpoints when tab.

PCoIP Management Console does not check the value of device bandwidth setting

32527

The PCoIP Management Console Profile editor does not enforce the requirement that Bandwidth Floor ≤ Bandwidth Target ≤ Bandwidth Limit. Profile content that does not meet this requirement will fail to apply to a zero client.

Workaround:

Ensure that the profile content meets the requirements. Consider setting all three values in the profile to ensure this.

Endpoint labels with underscore characters at the start or end are not displayed properly

32398

Endpoints that have the underscore character '_' at the start and/or end of the label are not properly displayed in the PCoIP Management Console. Blank fields are shown instead of endpoint data.

Workaround:

Avoid underscores at the start and end of endpoint labels.

Daily schedules may occur one additional time

27959

Daily recurring schedules may occur one additional time after the End Date and Time set in the schedule.

Profile's HD Audio setting may fail if set differently to Local USB Audio Driver

27823

PCoIP Management Console profiles that set Local USB Audio Driver to Enable must also set HD Audio to Enable. Otherwise, the profile will fail to apply to zero clients that have HD Audio disabled.