You can access this page from the Configuration > Initial Setup menu.
AWI Host Initial Setup Page
Audio Parameters
Parameter | Description |
---|---|
Enable HD Audio |
Enables audio support on the host or client. |
Enable Audio Line In |
Enable: Use the line-in connector found on the client. Disable: Use the line-in connector as a microphone input. Follow the onscreen instructions if you have Windows Vista or Windows 7 installed on the device. |
Network Parameters
Parameter | Description |
---|---|
Enable DHCP |
Enables DHCP (as opposed to using manual IP address configuration) |
IP Address |
Device’s IP address |
Subnet Mask |
Device’s subnet mask |
Gateway |
Device’s gateway IP address |
Primary DNS Server |
Device’s primary DNS IP address |
Secondary DNS Server |
Device’s secondary DNS IP address |
Session Parameters
Parameter | Description |
---|---|
Accept Any Client |
Lets the host accept any client for a PCoIP session. |
Client MAC Address |
Lets you specify the client MAC address for a PCoIP session. Note: You cannot set the client MAC address to 00-00-00-00-00-00. |