You can access this page from the Configuration > Initial Setup menu.
AWI Client Initial Setup Page
Audio Parameters
| Parameter | Description |
|---|---|
|
Enable HD Audio |
Enables audio support on the host or client. |
Network Parameters
| Parameter | Description |
|---|---|
|
Enable DHCP |
Enables DHCP (as opposed to using manual IP address configuration) |
|
IP Address |
Device’s IP address |
|
Subnet Mask |
Device’s subnet mask |
|
Gateway |
Device’s gateway IP address |
|
Primary DNS Server |
Device’s primary DNS IP address |
|
Secondary DNS Server |
Device’s secondary DNS IP address |
Session Parameters
| Parameter | Description |
|---|---|
|
Identify Host By |
Specifies the host identify method |
|
Host IP Address |
Specifies the host IP address |
|
Host MAC Address |
Specifies the host MAC address. You can set the host MAC address to 00-00-00-00-00-00 to ignore this field when a session starts. |
Note: When host discovery or connection management is configured on the client, you cannot modify the client session parameters. A message appears on the Initial Setup Client page instead of the session parameters.