Setting Up Japanese Language and Keyboards
The following tutorial demonstrates how to set up Japanese language and keyboard for Windows PCoIP Software Client and connecting to Microsoft's Japanese Windows Server. Setting up language and keyboard is performed both on the host and client side. Note: …
Knowledge Base Article Tutorial Setup Peripheral Devices HP Anyware Zero Clients
Last modified: May 9, 2025
33695
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
TROUBLESHOOTING USB peripherals
This article provides a brief list of troubleshooting steps for common issues involving USB peripherals (e.g. DVD drives/burners, keyboards, mice, usb, smart phones, storage devices, hard drives, scanners, printers). This is not intended to be a …
Knowledge Base Article Troubleshooting Peripheral Devices Remote Workstation Card HP Anyware Zero Clients
Last modified: November 30, 2024
23150
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
How do I bridge a USB device on a PCoIP Zero Client?
PCoIP Zero Clients locally terminate HID USB devices when connecting to: VMware View virtual desktops, or PCoIP Remote Workstation Cards (host cards) on systems where the PCoIP Host Software is installed and the Local Cursor and Keyboard feature is …
Knowledge Base Article Tutorial Peripheral Devices Zero Clients
Last modified: September 3, 2023
18120
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
Why is my redirected USB device not working after installing or upgrading the Horizon View Agent?
Scenario 1: USB Redirection is not enabled by default in View Agent Starting with version of View Agent 6.1, VMware changed the default status of the USB Redirection feature which is no longer enable by default. …
Knowledge Base Article Troubleshooting Peripheral Devices Zero Clients
Last modified: September 3, 2023
10782
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
USB and Analog audio through PCoIP Zero Clients
This knowledge base article explains analog and USB audio behavior in PCoIP environments. When a USB audio device is used without the local USB audio driver enabled, the USB audio device is remotely bridged to the host. In this case, the audio stream data …
Knowledge Base Article Advisory Performance Peripheral Devices Zero Clients
Last modified: September 3, 2023
8995
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
Which webcams are supported by the various PCoIP host/client configurations?
Please note that some webcam models have been found to contain different hardware within the same model (possibly identified by a hardware revision number), causing these webcams to behave differently when connected to a PCoIP Zero Client. Ensure to test …
Knowledge Base Article Advisory Peripheral Devices Zero Clients
Last modified: September 20, 2023
7345
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
How to identify which USB port on my PCoIP Zero Client is behind an integrated/internal USB hub?
Scenario In some cases a user will plug a USB device into a port on a PCoIP Zero Client and the device will fail or not work as expected. This is caused when a USB hub is used between the USB peripheral and the PCoIP Zero Client root hub. This is not …
Knowledge Base Article Tutorial Peripheral Devices Zero Clients
Last modified: September 3, 2023
7202
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
PCoIP TROUBLESHOOTING STEPS: Smart cards and Proximity cards
This article provides a brief list of troubleshooting steps and describes some common issues for smart card and proximity card failures. It is not intended to be a comprehensive troubleshooting guide.  Prior to diving into a deep investigation please …
Knowledge Base Article Troubleshooting Peripheral Devices Security Zero Clients
Last modified: September 25, 2023
7130
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
Why does my webcam or USB headset not work when connected to a PCoIP Zero Client at the same time?
Problem Your webcam and USB headset are connected to the PCoIP Zero Client at the same time and only one of the two works. When only one of the two devices is connected, it works as anticipated. In the example below, the Logitech USB Headset (901) is the …
Knowledge Base Article Troubleshooting Peripheral Devices Zero Clients
Last modified: September 3, 2023
6362
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
What does the status of attached USB devices mean in the AWI?
In the Administrator Web Interface (AWI) of the PCoIP Zero Client you can review the status of any attached device ( i.e. monitors, usb ). The status of the device is as follows: Disconnected  or  Not Connected  - no device connected to a display port. …
Knowledge Base Article Advisory Peripheral Devices Zero Clients
Last modified: October 23, 2023
4346
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5