FAQ - What are the required TCP/UDP ports for PCoIP technology?
Answer: The TCP and UDP ports assigned for PCoIP technology are shown in the tables below. Please note that IANA assigned port 4172 to the PCoIP protocol. HP Anyware License Server HP Anyware License Server Port Port Number Direction Description Online …
Knowledge Base Article FAQ Setup HP Anyware Management Console Remote Workstation Card Zero Clients
Last modified: May 1, 2025
53578
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
Setting Up Japanese Language and Keyboards
The following tutorial demonstrates how to set up Japanese language and keyboard for Windows PCoIP Software Client and connecting to Microsoft's Japanese Windows Server. Setting up language and keyboard is performed both on the host and client side. Note: …
Knowledge Base Article Tutorial Setup Peripheral Devices HP Anyware Zero Clients
Last modified: May 9, 2025
33670
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
À quoi sert l’adresse IP de secours ?
La carte PCoIP Zero Client ou PCoIP Remote Workstation est configurée sur ses paramètres d’usine par défaut. Par défaut, le périphérique PCoIP est en mode DHCP. Parce qu’il est en mode DHCP, lorsqu’il est connecté pour la première fois à un réseau, il …
Knowledge Base Article Tutorial Setup Remote Workstation Card Zero Clients
Last modified: May 1, 2025
24775
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
What is the fallback IP address used for?
Out of the box, the PCoIP Zero Client or PCoIP Remote Workstation Card is configured to its factory default settings. By default, the PCoIP device is in DHCP mode. Because it is in DHCP mode, when it is first connected to a network, it tries to obtain a …
Knowledge Base Article Tutorial Setup Remote Workstation Card Zero Clients
Last modified: May 1, 2025
24775
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
What versions of VMware Horizon does the PCoIP Zero Client Firmware support and is pre-certified with?
Support PCoIP firmware is supported with the publicly available Horizon release available at the time of the firmware release and is compatible with one major release of Horizon prior to this. Further information for each release can be found via their …
Knowledge Base Article Advisory Setup Third Party Enhancements Zero Clients
Last modified: July 22, 2024
21634
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
Tera 2 PCoIP Zero Client and PCoIP Remote Workstation Card firmware prerequisites when upgrading to new firmware releases.
Answer Depending on the currently installed firmware version on your Tera2 device, an upgrade to new firmware may require an intermediate firmware upload. To upgrade the PCoIP Zero Client and PCoIP Remote Workstation Card firmware, follow the associated …
Knowledge Base Article Troubleshooting Management Setup Remote Workstation Card Zero Clients
Last modified: September 3, 2023
13424
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
How do I upload firmware on PCoIP Zero Clients or PCoIP Remote Workstation Card?
This knowledge base article applies to using the Administrative Web Interface (AWI) as the tool used to upload firmware. To upload the firmware using the PCoIP Management Console, refer to Management Console 202x.x (or 1.10.x) administrators' guide and …
Knowledge Base Article Tutorial Setup Management Management Console Remote Workstation Card Zero Clients
Last modified: September 22, 2023
9729
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
How do I find the IP address of my newly installed PCoIP Zero Client or PCoIP Remote Workstation card?
Answer: You can determine the IP address associated with your device using one of the following methods: Before you begin, write down the MAC address of the device you want to determine the IP address of. For most of these methods, the MAC address is …
Knowledge Base Article Tutorial Setup Remote Workstation Card Zero Clients
Last modified: September 3, 2023
8546
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
With All Access, is there still a free option for PCoIP Zero Client firmware and PCoIP Management Console?
Yes,  HP Anyware does offer the ability to trial free of charge, the Zero client firmware and the Management Console.  Once a trial is complete, the Management Console will still be able to be used to manual management of up to 100 endpoints. Subscription …
Knowledge Base Article Advisory Setup Management Console Zero Clients
Last modified: September 3, 2023
7494
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
Sample nginx configuration for proxy when using remote device management
This is a sample configuration when using a NGINX version 1.14.1 reverse proxy. It was used for a NGINX system installed on Rocky Linux 8. You will be required to modify the highlighted unique fields for your environment. Other reverse proxy systems may …
Knowledge Base Article Tutorial Management Setup Management Console
Last modified: April 25, 2024
6593
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5