FAQ - What are the required TCP/UDP ports for PCoIP technology?
Answer: The TCP and UDP ports assigned for PCoIP technology are shown in the tables below. Please note that IANA assigned port 4172 to the PCoIP protocol. HP Anyware License Server HP Anyware License Server Port Port Number Direction Description Online …
Knowledge Base Article FAQ Setup HP Anyware Management Console Remote Workstation Card Zero Clients
Last modified: May 1, 2025
53547
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
Setting Up Japanese Language and Keyboards
The following tutorial demonstrates how to set up Japanese language and keyboard for Windows PCoIP Software Client and connecting to Microsoft's Japanese Windows Server. Setting up language and keyboard is performed both on the host and client side. Note: …
Knowledge Base Article Tutorial Setup Peripheral Devices HP Anyware Zero Clients
Last modified: May 9, 2025
33635
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
Error 6405: PCoIP Agent failed to launch the remote session
Problem When connecting to a HP Anyware PCoIP Agent the client receives the "Error 6405: PCoIP Agent failed to launch the remote session. Please try again. If this failure persists, please report this failure to your system administrator."     Cause The …
Knowledge Base Article Troubleshooting Setup Session HP Anyware
Last modified: May 20, 2025
27854
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
What is the fallback IP address used for?
Out of the box, the PCoIP Zero Client or PCoIP Remote Workstation Card is configured to its factory default settings. By default, the PCoIP device is in DHCP mode. Because it is in DHCP mode, when it is first connected to a network, it tries to obtain a …
Knowledge Base Article Tutorial Setup Remote Workstation Card Zero Clients
Last modified: May 1, 2025
24766
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
À quoi sert l’adresse IP de secours ?
La carte PCoIP Zero Client ou PCoIP Remote Workstation est configurée sur ses paramètres d’usine par défaut. Par défaut, le périphérique PCoIP est en mode DHCP. Parce qu’il est en mode DHCP, lorsqu’il est connecté pour la première fois à un réseau, il …
Knowledge Base Article Tutorial Setup Remote Workstation Card Zero Clients
Last modified: May 1, 2025
24766
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
What versions of VMware Horizon does the PCoIP Zero Client Firmware support and is pre-certified with?
Support PCoIP firmware is supported with the publicly available Horizon release available at the time of the firmware release and is compatible with one major release of Horizon prior to this. Further information for each release can be found via their …
Knowledge Base Article Advisory Setup Third Party Enhancements Zero Clients
Last modified: July 22, 2024
21623
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
HP Anyware Instructions for Consumer Grade NVIDIA GPUs (e.g. GeForce RTX 2080)
Overview  The purpose of this document is to outline key components, installation instructions and important notes of  HP Anyware on physical workstations with consumer grade NVIDIA GPUs.  NOTE: This document is intended for NVIDIA consumer grade GPUs. …
Knowledge Base Article Tutorial Setup HP Anyware Remote Workstation Card
Last modified: November 30, 2024
19452
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
Why can't I change the display resolution in Windows when using HP Anyware on Windows?
Problem When connected to a remote machine via HP Anyware on Windows, opening the display settings results in greyed out options and a message "Some settings are controlled by your system administrator". You cannot change the screen resolution, select the …
Knowledge Base Article Troubleshooting Display HP Anyware Zero Clients
Last modified: April 16, 2024
13612
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
Tera 2 PCoIP Zero Client and PCoIP Remote Workstation Card firmware prerequisites when upgrading to new firmware releases.
Answer Depending on the currently installed firmware version on your Tera2 device, an upgrade to new firmware may require an intermediate firmware upload. To upgrade the PCoIP Zero Client and PCoIP Remote Workstation Card firmware, follow the associated …
Knowledge Base Article Troubleshooting Management Setup Remote Workstation Card Zero Clients
Last modified: September 3, 2023
13417
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5
Black screen on my locally connected monitor on a physical workstation after remotely connecting to a PCoIP session
Problem A black screen displays on a monitor connected to a workstation that had a previous or active remote PCoIP session established. In a typical scenario, A remote worker establishes a PCoIP connection from his home to their office workstation that …
Knowledge Base Article Troubleshooting Display HP Anyware
Last modified: September 3, 2023
11876
Give it 1/5
Give it 2/5
Give it 3/5
Give it 4/5
Give it 5/5