AWI Tera1 Client: Power Settings

The Power page lets you configure timeout and power settings for the client. You can access this page from the Configuration > Power menu.

Figure 7-88: AWI Tera1 Client Power Page

Table 7-86: AWI Tera1 Client Power Page Parameters

Parameter	Description
OSD Screen-Saver Timeout	Configure the number of seconds to wait after a period of inactivity (i.e., no keyboard or mouse action) before the client puts its attached displays into low power mode. Valid values are 10 to 9999, or use 0 to disable the feature. Note: This timeout only applies when the device is not in session.
Remote Host Power Control	Configure the functionality of the client's remote PC button. The host is commanded to perform a soft power off (i.e., to go into sleep mode) when the client's remote PC button is pressed for less than four seconds and soft power off is enabled. The host is commanded to perform a hard power off (i.e., to shut down) when the client's remote PC button is pressed for more than four seconds and hard power off is enabled. Select from the following options: Power-off not permitted: Users cannot shut down the host or put it in sleep mode. Soft Power-off only: Users can put the host in sleep mode but not shut it down. Hard Power-off only: Users can shut down the host but not put it in sleep mode. Soft and Hard Power-off: Users can put the host in sleep mode and shut it down.

Parameter

Description

OSD Screen-Saver Timeout

Configure the number of seconds to wait after a period of inactivity (i.e., no keyboard or mouse action) before the client puts its attached displays into low power mode. Valid values are 10 to 9999, or use 0 to disable the feature.

Note: This timeout only applies when the device is not in session.

Remote Host Power Control

Configure the functionality of the client's remote PC button.

The host is commanded to perform a soft power off (i.e., to go into sleep mode) when the client's remote PC button is pressed for less than four seconds and soft power off is enabled.

The host is commanded to perform a hard power off (i.e., to shut down) when the client's remote PC button is pressed for more than four seconds and hard power off is enabled.

Select from the following options:

Power-off not permitted: Users cannot shut down the host or put it in sleep mode.
Soft Power-off only: Users can put the host in sleep mode but not shut it down.
Hard Power-off only: Users can shut down the host but not put it in sleep mode.
Soft and Hard Power-off: Users can put the host in sleep mode and shut it down.